Page-3 news - Guangzhou Taixin Auto parts Trading Co., Ltd.

2023-02-01 What's the stuffy sound of the car running The moving car is the result of the normal operation of the complex internal structure, but if there is an anomaly in the operation, it will issue different sounds or other prompts, so, what happened to the muffled sound of the car running? 1. Abnormal tire pressure. Car tires are the only part of the vehicle in contact with the ground. When the tire pressure is too high, it will make a muffled sound when driving on the bumpy road surface, which will affect the safety of the vehicle, the need to adjust the tire pressure, or change the road condition. 2. The vehicle drive shaft is abnormal. The drive shaft is an important connection between the power of the vehicle engine and the wheel. When the drive shaft is abnormal, it will interfere with the operation of the fixed parts around it and make a muffled sound when the vehicle is running. In addition to the above two points, if the vehicle steering wheel power oil is insufficient, or the transmission gear damage will lead to the driving vehicle issued a dull sound. The abnormal sound of vehicles is a warning of problems and faults. It is necessary to find out the specific part of the sound and solve it as soon as possible, so as not to bring more damage and danger to the vehicle.

2023-01-30 What's with the engine hissing The engine is very important for the car, is equivalent to the importance of the heart to the human body, if the engine once there is a fault, will directly affect the normal operation of the vehicle, then the engine hissing sound is what happened? 1, the engine hiss abnormal sound, may be the car cooling system failure. If there is a problem with the cooling system, it is easy to cause the temperature of the engine to become high. The owner can check the use of the coolant. If it is caused by the lack of coolant in the car, the owner should fill it in time. 2. If the vehicle is parked for a long time and there is a hissing noise when it is used again, it may be that the oil is flowing back to the oil pan, and the engine is lack of oil lubrication, so there will be a abnormal noise, but this situation generally waits until the oil normally flows to the engine, the abnormal noise will disappear by itself. 3. It may also be caused by the belt of the engine being too loose or too dirty. The owner can check the use of the belt, if the belt is loose, it only needs to adjust the tightness.

2023-01-29 Car three locks on a lock on how to return a responsibility 1, first of all, you can observe whether your door is not closed, there is a door is not good, then the car dashboard will show that the door is not closed strictly, and this time naturally can not be locked. 2. Check whether there is a fault in the door lock actuator and the door lock controller. If there is a fault in one of them, it will also lead to a door lock. 3, the motor aging, or the switch line has a fuse damage, the fuse is burned out, then you can only replace the fuse, after troubleshooting can solve the problem of door lock. 4. If there is a fault in the central control lock, you can check whether the motor is aging and needs to be replaced, so as to solve it. Once there are three locks on a door lock, then you can check whether the above situation, check and repair.

2023-01-15 Happy Chinese New Year Dear Friends: Around CHINESE NEW YEAR is around the corner,Thank you for your support and cooperation over the past year.Happy Chinese New year. Wish you a good new year. Best Regards. Taixin Auto Parts.

2023-01-14 What happened to the rustling of the engine When driving the vehicle, it is found that the engine has abnormal sound. In the face of such problems, it is necessary to find the cause in time and maintain and deal with it. What about the rustling noise in the engine? 1. The sound of the car's valve. When the car starts cold, the water temperature and oil temperature in the car are relatively low, and the lubrication degree and viscosity of the oil are not enough, so it is easy to lead to the top cylinder can not be adjusted normally, which makes the rustling friction from the engine abnormal sound. 2. Hydraulic tappet of the car. If the hydraulic tappet of the car is badly worn, or the oil pressure of the car oil is too low, air may enter the tappet, so the owner will hear the abnormal sound from the car engine. 3. The front cover of the engine is installed abnormally. The engine's rustling noise may also be due to the fact that its front cover is not properly assembled, so the car's power output rises when it starts cold. If this is the case, then it is recommended that the owner let the maintenance shop reassemble the front cover of the engine to solve the problem of abnormal sound.

2023-01-13 What's wrong with the squeaking of the vehicle at low speed When driving, the vehicle is running at a low speed and there is a squeak. 1. The gear is loose or damaged. The car can run normally, and the well-matched gear inside the car plays a very big role. If the gear of the car is loose or the gear is broken, so that it is damaged, then there may be a squeaking sound at low speed. 2. Engine failure. It's possible that a screw on the engine's guard plate has come loose, causing the owner to squeak at low speeds. You can send the car to the auto repair shop, let the professionals help themselves to the screws above the guard board to firm, if the reinforcement after the sound is not, then this may be the reason. 3. Brake system failure. It may be that the car's brake disc rusts too much, or the brake pad is worn too badly, causing the owner to ring when driving at a low speed or applying the brakes at a low speed.

2023-01-12 How to solve the shock absorption abnormal sound in general When the shock absorber is abnormal, the safety of the vehicle will be reduced, and it must be dealt with in time. Then how to solve the abnormal sound of shock absorption in general? 1. Tighten loose nuts of shock absorber. When the vehicle is running for a long time, the compression vibration will lead to the loosening of the nut fixing the shock absorber, resulting in abnormal sound of the shock absorber. In this case, the loose nut needs to be re-tightened. 2. Replace the new shock absorber. When the shock absorber leaks oil or lacks oil, it is easy to cause the shock absorber abnormal sound. Therefore, when the owner finds that the shock absorber has serious oil leakage or lack of oil, it is recommended to replace the new shock absorber in time, otherwise the vehicle is prone to traffic accidents. 3. Replace the rubber sleeve of the balance pole. If the ball head or rubber bushing is connected above the top of the shock absorber, there is a gap between the two and the fixed point, which will lead to abnormal sound during the running of the vehicle. In this case, the solution is to replace the rubber sleeve of the balance rod, so as to solve the abnormal sound of the shock absorber.

2023-01-11 How shock absorbers work Shock absorber. In the suspension system, vibration occurs due to the impact of the elastic element. In order to improve the ride comfort of the vehicle, shock absorber is installed in parallel with the elastic element in the suspension to attenuate the vibration. The shock absorber used in the automobile suspension system is the hydraulic shock absorber, its working principle is: when the frame (or body) and the relative motion between the axle vibration, the piston in the shock absorber moves up and down, the oil in the shock absorber chamber will repeatedly flow from a cavity through different pores into another cavity. At this time, the friction between the hole wall and the oil and the internal friction between the oil molecules form a damping force on the vibration, so that the vibration energy of the vehicle is converted into the heat energy of the oil, and then absorbed into the atmosphere by the shock absorber. When the oil channel section factor is constant, the damping force increases or decreases with the relative motion speed between the frame and the axle (or the wheel), and is related to the oil viscosity. Shock absorber and elastic components undertake the task of mitigating impact and damping, damping force is too large, will make the suspension elasticity deteriorates, and even damage the shock absorber connector. Therefore to adjust the elastic element and shock absorber this contradiction.

2023-01-11 Cause of noise generated by shock absorber "Shock absorber will produce noise in actual use, mainly caused by shock absorber and plate spring, frame or shaft collision, rubber pad damage or fall off, shock absorber dust cylinder deformation, insufficient oil and other reasons. The cause should be identified and fixed. After driving 10km on a road with poor road conditions, the owner can stop the car and touch the shock absorber shell with his hand. If it is not hot enough, there is no resistance inside the shock absorber and the shock absorber is not working. Appropriate lubricating oil can be added and then tested. If the shell is hot and the shock absorber is short of oil, add enough oil. Otherwise, shock absorbers are ineffective."

2023-01-10 Caused damage to air filter reason The air filter is a filtering barrier when the air enters the cylinder. It can filter out the suspended particles and dust in the air, which can effectively guarantee that the car can have enough air intake, and Can also increase the use of some parts of the time limit. Because the air filter will block those impurities when it is in operation, the use of the filter for a longer period of time will gradually reduce its filtering performance. Therefore, timely performance replacement is required, if it is in those cities where industrial pollution and dusty weather are serious. The replacement cycle of air filters will be short. However, when replacing, it is necessary to ensure the quality of the filter, or else it will not achieve good results. When choosing an air filter , the choice is very cautious. There are many brands of air filter on the market, and the brand, quality and price of large and small are all very large. chose some low-priced filter brands, resulting in poor filterability and stability. After long-term use, the vehicle's The engine performance is also reduced, and fuel consumption has suddenly increased. After the air filter is blocked, it should not be dismantled and used without permission. Although it may not be visible for a short period of time, damage to the engine will affect the safety performance after a long time.

2023-01-09 Brake Shoe maintenance method skills Everyone knows that the brake pads are called brake pads, but there is also a brake shoe. Although it is small in size, it also plays a very important part. How to protect the brake pads? Maintenance method: 1. Check the brake shoes once every 5000 km under normal driving conditions, not only check the remaining thickness, but also check the wear state of the shoes. The degree of wear on both sides is the same, whether the return is free or not, and it is found to be abnormal. The situation must be dealt with immediately. 2. The brake shoe is generally composed of two parts: the iron liner and the friction material. Do not replace the brake shoe after the friction material has been worn out. For example, the front brake shoes of the Jetta, the new piece has a thickness of 14 mm, and the ultimate thickness of the replacement is 7 mm, including more than 3 mm of iron liner thickness and nearly 4 mm of friction material thickness. Some vehicles have a brake shoe alarm function that will alert you to change the shoe once the wear limit is reached. The shoe that has reached the limit of use must be replaced, even if it can be used for a period of time, it will reduce the braking effect and affect the safety of driving. 3. When replacing, you need to change the brake pads provided by the original spare parts. Only in this way can the braking effect between the brake pads and the brake discs

2023-01-09 How to determine whether the brake pad needs to be replaced How to tell if brake pads need to be replaced: First of all, the thickness. Second, listen to the sound. Third, rely on foot feeling. Generally, the service life of brake pads is about 40,000-60,000km. Harsh vehicle environment and aggressive driving will shorten its service life in advance. First of all, the thickness. The thickness of the new brake pad is generally about 1.5cm, and it will become thinner due to friction during use. If the black friction material of the brake pads is almost worn down and only one-third (about 5 mm) of the thickness is left, it is necessary to consider replacement. Second, listen to the sound. If you hear a sizzling sound, similar to the sound of rubbing iron, you should replace the brake pad in time. Because the brake pads are so thin, the limit marks on both sides rub directly against the brake discs. Third, rely on foot feeling. I feel very tired. There is always a soft feeling. It often takes a deeper step to get the same braking effect. When emergency braking is used, the pedal position is obviously low. It may be that the brake pads have lost most of their friction and must be replaced. Generally, most brake discs are distributed with three small grooves, called wear indicators. When the brake disc wear, can not see the small groove, that has reached the wear limit, need to be replaced immediately.

2023-01-07 What causes the spark plug life to shorten and needs to be replaced The ignition device of the car determines whether the car can start normally, and the spark plug is a very important accessory in the ignition system. Everyone should know that spark plugs are easily damaged parts. If they are used improperly or for a long time, various problems will occur and the performance of the car will be affected. At this time, the spark plug should be replaced. So, under what circumstances, change the spark plug, how do you know that the spark plug should be replaced? What causes the spark plug life to shorten and needs to be replaced The length of life of the spark plug is determined according to the driver's driving habits and the operation of the engine. 1. The quality of the fuel is not enough. Frequently go to some private places or where the quality of the oil is not enough. 2. The car is overloaded for a long time. 3, violent driving without moving, often come down the floor oil. 4. Drive in a relatively harsh environment for a long time. To maintain good driving habits, to do the daily maintenance of the car, the health of the car, the driving Safety will help a lot.

2023-01-07 why should spark plugs be replaced and when to change the spark plug ? Spark plugs, why should spark plugs be replaced? A spark plug is a very important part of the ignition system. It generates a high voltage between the two poles, which generates a current, which in turn generates an electric spark. However, because the ignition requirements of the engine are very precise, the heat value, shape and area of the spark determine the combustion efficiency, so it has a certain impact on fuel consumption and power output. However, the continuous use of the electrode will gradually become shorter, and the working distance between the electrodes will become longer, thereby affecting the ignition performance. Due to the use of different oils and driving environment, there will gradually be stains and carbon deposits on the spark plug, which will affect the performance of the spark plug. At this time, the spark plug needs to be replaced. If the ignition capacity is reduced, the fuel oil will be insufficient, and the fuel consumption will increase. If the situation is serious, the engine may have idling and jitter. When driving at low speed, there will be jitter, driving is weak, and there is a cold car. It is difficult to start the engine. Spark plug life, when to change the spark plug Under normal circumstances, the service life of ordinary copper core spark plug is 30,000 km, while the service life of

2023-01-06 Use Internet + to open a new model of auto parts industry As the foundation of automobile industry, auto parts industry is a necessary factor to support the sustainable and healthy development of automobile industry. In particular, the independent development and innovation carried out in the automobile industry with vigour and vitality needs a strong parts system as support. The independent innovation of auto parts industry has a strong impetus to the development of the vehicle industry. They are mutual influence, interaction and common development. With the increasing competition in the auto parts industry, mergers and acquisitions and capital operation between large auto parts industry enterprises are becoming more frequent. Outstanding auto parts industry enterprises at home and abroad pay more and more attention to the analysis and research of the industry market, especially the in-depth study of the current market environment and customer demand trends, in order to occupy the market in advance and obtain the first-mover advantage. Because of this, a large number of excellent brands rise quickly, gradually become the industry leader. "Internet Plus" is a new way of thinking, way of production and way of life, which will constantly give rise to new business models. So, for China's auto parts industry, "Internet plus" in the end add what? In recent years, major auto parts industry giants have launched Internet projects in order to integrate green product industry resources more effectively. In terms of the new business model of Internet + Chinese auto parts industry, it is actually to open Chinese auto parts to global consumers and merchants through online platforms, and provide consumers with mor

2023-01-04 IAA MOBILITY Exhibition in Germany The second edition of the biennial exhibition will be held in Munich on September 5, 2023 "Continuing the achievements of 2021, 2023 will see more exhibitors from the fields of smart connect and sustainable mobility. Our mission is to make innovative solutions from around the world a real experience at IAA. The exhibition will focus on three major themes: sustainability, future mobility and technology. The exhibition will cover cars, air taxis, electric motorcycles, bicycles and drones In addition to the theme changes, the organizer has increased the intensity of the experience. "It is understood that IAA MOBILITY has divided the form of participation into two distinct parts. One is a B2C" open space "for the general public in central Munich, where visitors can experience products and corporate innovations up close. The other is a "summit" for B2B professionals, where participants can discuss the future of transportation and develop business partners.

2023-01-03 Hyundai Motor has quietly caught up While Toyota Motor and Volkswagen Group were competing fiercely for the leading position in the global auto industry, Hyundai Motor has quietly caught up, outselling General Motors, Nissan Motor and Stellantis in annual sales, and is now second only to Toyota and Volkswagen. Hyundai Auto parts are also on the rise In the first three quarters of this year, 56.8 million light vehicles were sold globally, down 5.2 percent year-on-year, data showed. Among them, Toyota and Volkswagen are still the top two, but Toyota has opened up a gap with Volkswagen; Hyundai Motor ranked third with 4.9 million units sold.

2022-12-31 Happy New Year 2023 HAPPY NEW YEAR'S DAY Wheels of history are rolling forward, leaves on the tree turns green to yellow, the busy and fulfilling 2022 is passing by. In the past year, the company of TAIXIN Auto Parts used focus, enthusiasm, and unremitting efforts created fruitful results. 2022 is an extraordinary year, while 2023 will be a special year full of hope. TaiXin Auto Parts will continue to create new value with full spirit and high morale. TaiXin Auto Parts will always adhere to the concept of cooperation, sharing, trust, accumulation, responsibility, stride forward to create new brilliance with new&old customers.

2022-12-29 How car engine parts work Car engines mix air and gasoline in a certain proportion to form a good mixture of car engine parts. At the intake stroke, the mixture is drawn into the cylinder, where it is compressed, ignited, and burned to produce heat energy. The high temperature and high pressure gas acts on the top of the piston, and pushes the piston to do linear reciprocating motion. The mechanical energy is output out through the connecting rod, crankshaft and flywheel mechanism. A four-stroke gasoline engine completes a working cycle in intake stroke, compression stroke, work stroke and exhaust stroke.

2022-12-27 About Spark Plug Spark plug, commonly known as the flame nozzle, its function is to release the pulse high voltage voltage sent by the high voltage wire (flame nozzle line), breakdown the air between the two electrodes of the spark plug, generate electric spark to ignite the gas mixture in the cylinder. The main types are: quasi type spark plug, edge body protruding spark plug, electrode type spark plug, seat type spark plug, pole type spark plug, face type spark plug, etc The spark plug is installed on the side or top of the engine. The early spark plug is connected to the distributor by the cylinder line. In the last ten years, the engine of the car is basically changed to the ignition coil and the spark plug is directly connected. The working voltage of the spark plug is at least 10000V. High voltage is generated by 12V electricity through the ignition coil, and then transmitted to the spark plug

2022-12-23 Merry Christmas and happy New Year! Dear friends: Merry Christmas and happy New Year! The Christmas and New Year holiday is coming near once again. All of us at Tai xin Auto Parts Company wish you and your family a Merry Christmas and a prosperous New Year. May your New Year be filled with peace, joy and happiness;

2022-12-22 Online sales of auto parts will become the competition place for future A large number of small and medium-sized accessories suppliers in China are concentrated in large and medium-sized auto parts cities. With the rapid development of China`s auto market, the competition is becoming increasingly fierce. The Internet may be one of the magic weapons for future companies to win. For auto parts companies, whether it can be in the fierce market environment in the future Taking a favorable position in the competition and winning the competition will largely depend on the integration of auto parts companies and internet applications. At present, the main circulation channels of China's auto parts are still in Auto Parts City. The differences in different models of auto parts have resulted in higher requirements for professional quality and skills. It is difficult to clearly understand the price of each auto parts and working hours. Different regions and different models have different prices. The integration of automobile parts sales and the Internet can bring many advantages. It can save a lot of publicity costs, promote cost-free word-of-mouth publicity for corporate products in the network, establish a brand image, expand the online market, and increase the number of agents. Business, franchisees, better expand product sales.

2022-12-22 China's exports of auto parts and auto parts increased Recently, it was learned from the press conference of the 2nd China International Auto Parts Expo that in 2007 China`s auto and auto parts exports were US$24.55 billion, an increase of 54.9%; from January to August this year, China`s auto and auto parts exports were 21.23 billion US dollars, an increase of 42.1%. According to reports, the 2nd China International Auto Parts Expo will be held from November 12 to 15 at the China International Exhibition Center (New Hall) in Beijing. It will be mainly for the global auto parts market and after-sales service market. By then, it will There are more than 1,000 major multinational companies and domestic and above-scale parts and components companies exhibiting.

2022-12-12 2023 Sao Paulo International Auto Show in Brazil I. Introduction to the exhibition Sao Paulo International Auto Parts Exhibition (AUTOMEC) is the largest, most influential and professional large international exhibition event in South America. It is held every two years at the Anhembi Park Exhibition Hall in Sao Paulo. Organized by the Brazilian Auto Parts Association, the Sao Paulo Auto Parts Association and the Brazilian Auto Repair Association, the show is organized by Reed Exhibitions and the Brazilian Machinery Manufacturers Association (Alcantara Machado). II. Exhibition Information Name: 2023 Sao Paulo International Auto Parts Exhibition, Brazil Time: April 25-29, 2023 Cycle: Every two years Venue: Sao Paulo Convention Center (S? o Paulo Expo) III. Scope of exhibits 1. Components and systems: automobile parts and components, chassis, body, automobile power plant and electronic system and other related products 2. Accessories and modification: automobile accessories and automotive supplies, special devices, automobile modification, engine shape optimization design, design improvement, appearance modification and other related products 3. Repair and maintenance: depot equipment and tools, body r